The right inverter turns sunlight into savings.
We commission inverters that are matched to your plant, your grid connection, and your commercial objectives — not whatever's cheapest to install.
Undersized clips generation. Oversized wastes capital.
At Powermore, inverter selection happens after we've modelled your load profile, assessed your DISCOM connection type, and understood how you want to use your solar energy.
We don't carry stock or earn margins on hardware. Our recommendation is based entirely on what gives your project the best performance over its lifetime.
On-Grid String Inverters
The standard for grid-connected commercial and industrial plants. On-grid inverters synchronise with the DISCOM grid, enable net metering, and are engineered for continuous operation in Indian grid conditions.
- ✓Net metering enabled — every unit you generate offsets your bill; surplus exports earn credits.
- ✓Multi-MPPT architecture — handles complex rooftops with different orientations or partial shading.
- ✓Real-time cloud monitoring — see your plant's output from your phone, any time.
- ✓Range — 10 kW to 350 kW — scalable for any C&I project size.
- Available Capacities
- 10 · 20 · 30 · 50 · 100 · 250 · 350 kW
- AC Output Voltage
- 415 V Three Phase (230 V Single for ≤ 10 kW)
- AC Output Frequency
- 50 Hz
- Maximum Efficiency
- 98.6%
- European Weighted Efficiency
- 98.0%
- Maximum DC Input Voltage
- 1,100 V DC
- MPPT Voltage Range
- 200 – 1,000 V DC
- Number of MPPT Inputs
- 2 to 12 (depends on model)
- Maximum Input Current / MPPT
- 26 A
- Protection Class
- IP65 — outdoor rated, dust and rain resistant
- Display
- LCD — live power, voltage, fault codes
- Communication
- RS485, WiFi, Ethernet
- Grid Protection
- Anti-islanding, overvoltage, frequency protection
- Operating Temperature
- –25°C to +60°C (derated above 45°C)
- Cooling
- Natural convection — silent operation
- Standard Warranty
- 5 years (extendable to 10 years)
Hybrid Inverters
For businesses that can't afford to stop when the grid does. A hybrid inverter combines solar conversion with battery management in one unit — switching to battery in under 20 ms during outages.
- ✓Backup in under 20 ms — production equipment is protected before it even registers a fault.
- ✓Peak shaving — draw from batteries during peak tariff windows; charge during off-peak.
- ✓Zero-export mode — compliant with DISCOM restrictions where export is not permitted.
- ✓Range — 5 kW to 33 kW per unit, stackable for higher loads.
- Available Capacities
- 3 · 8 · 10 · 15 · 50 · 100 kW (stackable)
- AC Output Voltage
- 230 V Single / 415 V Three Phase
- AC Output Frequency
- 50 Hz
- Maximum Efficiency
- 97.5%
- Switch-to-Battery Time
- < 20 milliseconds
- Maximum DC Input Voltage
- 1,000 V DC
- MPPT Inputs
- 2 per unit
- Battery Compatibility
- Lithium Iron Phosphate (LFP) and Lead-Acid
- Battery Voltage Range
- 48 V to 800 V DC (depends on model)
- Operating Modes
- On-Grid · Off-Grid · Hybrid — all in one device
- Zero Export Mode
- Supported — DISCOM compliant
- Protection Class
- IP65
- Communication
- WiFi, RS485, CAN — app + SCADA compatible
- Standard Warranty
- 5 years
Microinverters
On complex industrial rooftops, microinverters eliminate string losses by converting DC to AC at each individual panel. One shaded panel affects only itself. Consistently 8–20% more annual generation.
- ✓Panel-level independence — shade, soiling, or a fault on one panel doesn't touch the rest.
- ✓Granular monitoring — see the output of every individual panel — identify issues immediately.
- ✓No high-voltage DC on the roof — safer installation, simpler electrical compliance.
- ✓25-year product warranty — on leading models — aligned with your plant's lifetime.
- Architecture
- One inverter per panel — fully independent
- Output per Unit
- 384 – 480 W AC (depends on panel size)
- AC Output Voltage
- 230 / 240 V Single Phase
- Maximum Efficiency
- 97.0%
- Sunlight Backup
- IQ8 forms a microgrid with panels alone — no battery needed for daytime backup
- Communication
- Powerline communication (PLC) — no extra wiring
- Monitoring
- Enphase Enlighten app — per-panel output, live and historical
- Protection Class
- IP67 — fully weatherproof
- Operating Temperature
- –40°C to +65°C
- Product Warranty
- 25 years — one of the longest in the industry
Selected for Indian grid & climate conditions.
Each brand selected for performance under Indian conditions and ability to support long-term C&I operations.
| Brand | What we source | Why it matters for your project |
|---|---|---|
| GoodWe | On-grid: 10–350 kW (SDT, GT, SMT, UT) | Widest C&I model range; SEMS cloud platform; extensively deployed in India |
| Sungrow | On-grid: 3–350 kW (SG String Series) | Global #1 by shipments; excellent grid fault ride-through; strong service network |
| Deye | On-grid & hybrid: 30–110 kW | Competitive performance on large C&I; reliable hybrid with LiFePO4 support |
| SolarEdge | On-grid, hybrid & optimisers: 5–100 kW | DC-optimised architecture with module-level monitoring; our pick for complex C&I rooftops |
| Growatt | On-grid & hybrid: 3–80 kW | Strong value on mid-size commercial projects; global spares and service |
| Enphase | Microinverters: IQ8 Series | World's #1 microinverter brand; 25-year product warranty; sunlight backup without batteries |
Inverters — full datasheets & wiring diagrams
PM-STR, Hybrid Series, and Enphase IQ8 — single PDF.
Let's design the right inverter architecture.
We model your load profile before we recommend anything.